Powershield Personnel
Technical Specification
Material Types
1.2mm - 2mm Galvatite ZF Galvanneal to EN 10142:2000
1.2mm - 4mm Stainless Steel Grade 304 (1.4301) to EN 58E
1.2mm - 4mm Stainless Steel Grade 316 (1.4401) to EN 58H
Finishes
Epoxy Powder Primed Finish
Polyester Powder Coated Finish
Satin Polish 180-240 grit (Stainless Steel Only)
Click here to download the standard coating colour range
'Rimex' Patterned Finish (Stainless Steel Only)
Click here to visit the Rimex web site
Standard Leaf Construction
- Two skins of 1.2mm (18ga.) thick steel
- 44mm thick door leaf with no face seams
- Doors are stiffened, insulated and sound deadened with pre-expanded, small cell honeycomb core material and laminated under pressure to the face skins
- Face skins are connected by a continuous 'deep pocket' interlocking edge lock seam for added strength and durability
- 1.6mm (16ga.) steel end channels projection welded to the top and bottom of the door
- Door edges are bevelled for ease of operation and close fit
- Doors are morticed, reinforced, drilled and tapped for three templated hinges
- On double doors, an astragal is folded into the leading edge of one leaf to ensure a totally sealed unit
Standard Frame Construction
- Manufactured from 1.5mm (16ga.) steel with single, double rebate or wraparound
profile - Supplied in either knock down or fully welded smooth finish
- Frames are morticed, reinforced, drilled and tapped for hinges and strikes
- Frames are provided with four fixings per jamb, built-in adjustment and complete with cover caps
